LANSING 52" X 120" OIL COUNTRY LATHE
WITH 25" SPINDLE BORE
Capacity: Distance between centers 120”
Swing over Bed 52”
Swing in gap 67”
Swing over cross slide 40”
Length of gap 20”
Width of bed 29 ½”
Headstock:
Spindle bore 25”
Spindle nose A1-35
Number of speed steps 3
Range of spindle speeds 0-177
Slides:
Tool retractor slide travel 1 ¼”
Compound slide travel 14 ½”
Cross slide, width X travel 13 ½”x 29”
Steady Rest:
3 roller jaws-----Capacity 5”-23”
Feeds:
Number of longitudinal and cross feeds 40
Range of longitudinal feeds in inches .004”-064”
Range of cross and compound feed .003”-053”
Rapid Longitudinal 60”/Min
Cross slide 30”/Min
Compound slide 30”/Min
Threads:
40 Metric threads .5-7.5
160 Inch threads (T.P.I.) standard 60-4 120-1
40 Module threads .25-3.75
40 Diametric threads 120-8
Tailstock:
Quill diameter 6”
Morse taper M.T.6
Quill travel 14”
Taper Attachment:
Length of machine taper 25 ½”
Amount of taper offset 3 ½”
Motors:
Spindle H.P.-D.C.60
Coolant H.P.-A.C. ¼”
Rapid H.P.-A.C. 1 1/3”
Lead screw H.P.-A.C. 3
Tailstock H.P.-A.C. 1/3”
Chucks:
(2) 4-jaw chuck 42”
Equipped With:
- Pendant Control on Apron & Control Panel on Headstock - Gap Bed - Heavy Duty Taper Attachment - Two 37" 4- jaw front and rear mounted independent chunks with 25" bore. - 60 HP - D.C. Motor and elect. equip. & SCR -DC Control- 3/220/440/60 Input. - 6 Way Rapid Traverse - Extra Heavy Duty Roller jaw steady rest - Motorized cooler equipment - Multiple position carriage stop - 2 Ground Steel Centers & sleeve - Amperage Load Meter - Bronze tipped followrest - Built in Hydraulic System - A2-35 American Standard Spindle Nose - Extended cross slide with tee slots - Set of Wrenches - Operation Manual - Automatic lead screw reversal system
ALL SPECIFICATIONS ARE APPROXIMATE & NOT BINDING
For complete information and our " - " PRICE
Call: (718) 492-7400
Fax: (718) 439-3930
E-mail: info@sandsmachinery.com