With Internal Attachment
Specifications
Center height—standard 5 ½”
Maximum admitted diameter—standard 11”
Maximum weight admitted—between centers 150 lbs
Workhead spindle Morse taper 4
Workhead reducing sleeve—special 3
Tailstock spindle Morse taper—standard 2
Special 3
Wheelhead spindle RPM—standard center RPM 1700/2100
Height machine
--Standard center height machine RPM 1500/1750
Workhead spindle RPM—1 st speed RPM 35-100-125-155
2 nd speed RPM 70-200-250-310
Longitudinal table speed per minute mm 190-300-380-470
Standard version (N.6) 7 ½”-12”-15” 18 ¼”
600-940 24”—37 ½”
Automatic grinding wheel infeed per table reversion:
On both sides on electromechanical drive mm 0.005-0.010-0.015
.0002”--.0004”--.0006”
Grinding wheel feed at every hand lever release mm 0.005 .0002”
At each division of micrometric handwheel mm 0.001 .0004”
Maximum table swivel for grinding tapers ± 5 °
Between centers
Maximum workhead swivel -30 ° +90 °
Maximum speed of internal grinding spindle RPM RPM 30.000
3-jaw self centering chuck diameter mm 60 6 ¼”
Wheelhead motor HP-for standard center HP 3
Height grinder
Workhead motor HP HP 025/0.33
Table motor HP-electromechanical version HP 0.25/0.33
Internal grinding attachment motor HP 1
Coolant pump HP 0.20
Distance between centers 40”
Machine net weight including internal
Grinding attachment (electromechanical version) 3922 lbs
ALL SPECIFICATIONS ARE APPROXIMATE & NOT BINDING
For complete information and our " - " PRICE
Call: (718) 492-7400
Fax: (718) 439-3930
E-mail: info@sandsmachinery.com