• The LANSING Model MX-7 represents a new machine design concept.  The utilization of linear guideway technology and LANSING'S rigid Column-Centered Headstock design allow the MX-7 to machine large parts accurately at high feed rates.
• Four linear guideways, two in the front and two at the rear of the column capture the headstock within the column and provide the machine with enhanced rigidity and stability.
• The Milling Ram is also captured on all sided utilizing a set of four linear guideways.
• Longitudinal ram growth is controlled through the use of a chiller system and temperature monitoring probes located throughout the ram assembly. (An optional Hydro-Mechanical droop compensation system can be provided to further enhance the MX-7's machining accuracy).
• The wide cast iron bed of the MX-7 provided an ultra-stable platform.  Fitted with linear guideways, the bed structure allows for the accurate machining of large parts at rapid feed rates.
• Power is transmitted from the drive motor to the milling ram through a two-range gear box; allowing higher torque and power transmission to the spindle than comparable belt-driven systems.

Machine with Rotary Table and Floor Plates

Machine provided with Fixed Boring Head Extension