MAX. SWING OVER BED: 100”
MAX. SWING OVER CARRIAGE: 81.2”
MAX. LENGTH OF WORKPIECE: 80”
MAX. LENGTH TO BE MACHINED: 72”
MAX. WIDTH OF BED: 44”
MAX. WEIGHT OF WORKPIECE BET. CENTERS: 22,046 LBS
SPINDLE NOSE: ISO A2-15
TAPER IN SPINDLE HOLE: METRIC NO. 120
SPINDLE BORE: 4”
SPINDLE SPEEDS: MANUAL 21 STEPS, RANGE 2 TO 200 RPM
No. Of longitudinal and cross feeds: 97 Kinds
Feed range per rev. of spindle: Longitudinal .00256” - .48”
Cross 6 mm .00128” - .24”
TOP SLIDE WITH MANUAL FEED: 0.032 TO 3 mm .00128” - .12”
Metric threads: 45 Kinds; 1 TO 120 mm
Whitworth threads: 42 Kinds, 30 to 1/4 t.p.i.
Module threads: 46 Kinds; 0.5 to 60 mm
pitch threads: 46 Kinds; 0.5 to 60
TRAVEL OF CROSS SLIDE: 40.8”
TRAVEL OF MIDDLE SLIDE (LONGITUDINAL): 16”
TRAVEL OF TOOL POST: 8”
rapid traverse SPEED: SADDLE, 149.6” / min
CROSS SLIDE, 74.8” / min
TOOL POST, 37.4” / min
TYPE OF TOOL POST: COMMON, SQUARE
SIZE OF TOOL: 1.8” × 1.8”
TRAVEL OF QUILL: 300 mm
TAPER IN QUILL: 3.2”; 1:7
POWER OF MAIN MOTOR: AC 40HP
Power of rapid motor: 2HP
Power of pump motor : 0.737HP
Power of cooling motor: .201HP
ELECTRICAL POWER: 380V/3PH/50HZCan be altered to suit needs
NET OVERALL DIMENSION OF THE MACHINE: 204”×88”×296”
4 JAW CHUCK, DIA. OF 80”, 1 SET
STEADY REST: 20” TO 44” SET
DEAD CENTER, 2 PCS
CENTER SLEEVE, 1 PIECE
BOLTs for foundation, 1 set
COOLANT SYSTEM
WORK LIGHT
SPECIAL TOOLS
ALL SPECIFICATIONS ARE APPROXIMATE & NOT BINDING
For complete information and our " - " PRICE
Call: (718) 492-7400
Fax: (718) 439-3930
E-mail: info@sandsmachinery.com