Replacement Cost Euro 50,000 = US$ 76,000.00
Working surface of table 12" x 28"
Maximum longitudinal traverse 34"
Maximum cross traverse 14"
Maximum length to be ground 28"
Maximum width to be ground 14"
Maximum distance table to wheel Spindle Center 22"
Table traverse speed range - ft./min. 10-100
Cross slide traverse speed range - ft./min. 0-10
Vertical feed of grinding wheel per handwheel revolution .05"
No. Of vertical feed handwheel graduations 50
Cross slide feed per handwheel revolution .2
No. Of cross feed handwheel graduations 200
Automatic cross feed rates timed with the table reversal .05-3/4"
Automatic vertical feed rates timed with the cross slide reversal .0005" - .0015"
Size of grinding wheel 16" x 2" x 5"
Power of wheel spindle motor 12 HP
Speed of grinding wheel 1400 RPM
Hydraulic pump motor 0.3 HP
Net weight approximately 5750#
Complete with the Following Accessories:
Motors and Square D electrical equipment
Separate hydraulic cabinet
Push button low voltage controls
Fuses and thermal overload protection on all motors
Coolant system
Wheel holder and wheel
Brackets for dial gauge mounting (less gauge)
Wheel balancer
Power rapid to wheelhead (self motorized)
Hydraulic wheel dresser with micrometer dial (less diamond)
Wheel guard
Table guard
Wrenches and operation manual
All specs are approximate and subject to revision
2 USED Elgin Surface Grinders Model RTL - 700 ALPA
Machines Need Some Work
Special Price AS-IS $15,000.00 Each
SPECIFICATIONS:
Working surface of table 20" x 28"
Max. Longitudinal traverse 34"
Max. Cross traverse 22"
Max. Length to be ground 28"
Max. Width to be ground 20"
Max. Distance table to wheel spindle center 22"
Table traverse speed ranges 10-100 ft./min.
Cross slide traverse speed range 0-10 ft./min.
Vertical feed of grinding wheel per handwheel revolution .05"
Number of vertical feed handwheel graduations 50
Cross slide feed per handwheel graduations .2"
Number of cross feed handwheel graduations 200
Automatic cross feed rates times with the table reversal .05" - 3/4"
Automatic vertical feed rates timed with the cross slide reversal .0005" - .0015"
Size of grinding wheel 16" - 2" - 5"
Spindle motor 12 HP
Hydraulic pump motor 4 HP
Coolant pump motor 0.3
Weight (approx.) 7,950 Lbs.
STANDARD ACCESSORIES:
*Motors and electrical equipment with separate hydraulic unit, push-
Buttons for low voltage control, fuses and thermal overload protection
on all motors.
*Electro-hydraulic system complete with external unit (without oil).
*Coolant system complete with external tank.
*Wheel holder complete with grinding wheel.
*Wheel truing device (without diamond).
*Wheel guard
*20" x 27" Electro Magnetic Chuck
• All specs are approximate and subject to revision
ALL SPECIFICATIONS ARE APPROXIMATE & NOT BINDING
For complete information and our " - " PRICE
Call: (718) 492-7400
Fax: (718) 439-3930
E-mail: info@sandsmachinery.com