FEATURES:

1.

Heavy duty casting with FC30 material for headstock.

2.

SKF bearing set for heavy cutting on main spindle.

3.

Headstock gears with SCM21 material, precision ground and hardened.

4.

Dual gearbox, easier for lnch/Metric threading.

5.

Magnetic brake system for spindle power.

6.

The bed way is very massive designed with FC30 material, special heat-treatment hardened and precision ground.

7.

Fully auto lubricating system for slideways.

8.

Tailstock body is heat-treated for heavy cutting and longer lifetime.

MODEL

T1060

CAPACITIES:

Swing over bed

1060mm

Swing over cross slide

750mm

Swing over gap

1610mm

Center height

530mm

Width of gap

570mm

Bed width & height

560mm & 600mm

Between centers

1.5M, 2M, 3M, 4M, 5M, 6M, 7M

HEADSTOCK:

Spindle bore

Ø156mm (Ø230mm, 310mm, 360mm, 510mm Option)

Spindle nose

A2-11 (A2-15, A2-20 Option)

Spindle speeds

12 steps, 9-600rpm (5-400rpm, 4-300rpm, 3-200rpm, 2-120rpm Option)

Main spindle motor

20HP (25HP, 30HP Option)

FEED & THREAD:

Cross feeds

0.065-0.96 (48)

Longitudinal feeds

0.13-1.92 (48)

Lead screw diameter

Ø50mm x 2TPI

Threading range, Metric

2-30mm / Pitch (44)

Threading range, Inch

1-16TPI (42)

Module pitch threads

1-15M (32)

DP. Pitch threads

2-30P (48)

TAILSTOCK:

Tailstock spindle

Ø125mm

Tailstock spindle taper

MT6

Quill travel

300mm

Net Weight

5650kgs (1.5M), 6100kgs (2M), 6650kgs (3M), 7750kgs (4M)
8800kgs (5M), 10500kgs (6M), 12500kgs (7M)

? The design & specifications are subject to change without prior notice.