The machine is suitable for use in the machinery manufacturing industry, printing machinery, heavy machinery, etc. The movement of worktable and the swiveling of the workpiece are controlled by AC variable frequency motors together with a frequency converter. The worktable is driven with a mechanical device and is controlled by manual mode as well as automatic mode.
Fast advance or reverse of the grinding wheel is driven by a hydraulic system.
The machine adopts a dynamic hydrostatic pressure spindle.
The grinding wheel is dressed through manual or automatic mode. A hydraulic device as well as a hand operation device carry out cross feed.

Technical Data

Minimum Swing over bed 2"
Maximum Swing over bed 32"
Distance Between Centers 120"
Max. swivel angle of upper-worktable Clockwise 1º
Max. swivel angle of upper-worktable Counter-Clockwise 2 º
Part Weight 11,000 lbs

Grinding Wheel Size
Minimum - 28.8" x 3"x 12.2"
Maximum - 36" x 3" x 12.2"

Grinding Wheel
- Speed	35M/S
- Power	22KW

Machine with Auxiliary Units
- Total connected load		40KVA
- Net weight	Approx.	31,000KG
- Voltage		220

Machine Base- made of rigid design out of cast iron.

Column- made of cast iron.

Manual Wheel Dressing

Power Supply 220 Volt/3Phase/60Hz

Lubrication type for each axis: oil lubricating.

•  Coolant Filtration System Cooling by soap-water.
Coolant filtration system cleans the coolant using paper filtration media.

Standard Machine Accessories

--- 1 set Coolant tank

--- 1 pc Wheel dresser

--- 1 set End Dresser

--- 2 set Open-type Steady rest

--- 2 set Grinding wheel with flange

--- 1 pc. Measuring Plate

•  Option

Option A	Arc dresser		1pc
Option B	Grinding wheel balancer		1pc